Bexley based, Sydney wide25 years on the toolsClean, ready-to-paint finishes
Commercial & Residential Plasterers, Sydney

Sydney Plastering, Done Properly

Fire-rated walls, suspended ceilings and partitions for builders and strata. Gyprock, cornice and repairs for homes.

5Fully licensedPhotos in before 3pm, priced same day

The systems and materials we build with

Why Sydney Plaster Master

Work That Holds Up

Good plastering is measured twice and finished properly. The rest is just turning up when you said you would.

Straight From the Start

Framing checked and set-out planned before we sheet. Most plastering problems are decided before the first board goes up.

Clean Sites

Floors protected, dust controlled as far as plastering allows, waste taken away.

We Turn Up

And if the day has to move, you hear it from us early rather than wondering where we are.

Ready for the Next Trade

Surfaces prepared so your painter starts on a flat wall instead of fixing ours.

Curved plasterboard bulkhead ceiling set and sanded in an apartment fitout
Who You're Calling

Bexley Based, Working Across Sydney

Twenty-five years in the trade, working out of Bexley. Most of our residential work is close to home across the St George area, and we cover the whole of Sydney — the Inner West, Eastern Suburbs, North Shore, North Sydney, Western Sydney and the Sutherland Shire.

The commercial side is office and retail fitouts, suspended ceilings, partitions and fire-rated systems for builders, shopfitters and strata managers. Doing both keeps us useful: commercial work keeps us sharp on systems and tolerances, domestic work keeps us honest about finish.

  • Commercial fitout and residential
  • Fire-rated, acoustic and Level 5 finishes
  • Licensed and insured — Lic. 453300C
Our Work Standard

The Details Behind a Better Finish

Same four steps whether it is one wall in Kogarah or a floor of partitions in the city.

1

Check the Base

Framing, moisture and existing surfaces inspected before anything gets covered up.

2

Fix It Properly

Boards, beads, joins and fixings installed to hold up long term, not just to look right at handover.

3

Finish the Surface

Feathered, sanded and checked in the light where the flaws actually show.

4

Leave It Clean

Waste removed and the area tidied before the room gets handed back.

How It Works

A Straightforward Way to Start

Four steps from first message to a finished surface.

1

Tell Us the Job

Photos and a suburb for residential work. Drawings and programme dates for commercial.

2

Written Quote

Scope and price in writing, with board types and systems named where it matters.

3

We Do the Work

Sheeted, set and finished, working around your trades and your timeline.

4

Check and Clean Up

We walk the job with you, fix anything that needs it and leave the site tidy.

Rated 5.0 from 10 reviews on Google

What People Say Afterwards

5.0
★★★★★10 reviews on Google
Robert Bishay
Allan and his team were incredible! Great communication, lovely to deal with and got the job done very quickly and I was extremely pleased with the quality of work. Highly recommend!
Brendan Giles
Alan gyprocked a doorway in and a wall for me at my house. The workmanship was great and the pricing was very reasonable and he was very polite.
Rachel R
A really lovely team, they were able to come by quickly to replace our mouldy gyprock. They did an awesome job, left the place very neat and the area they worked on looks great.
Plastering Questions

Before We Start

What areas does Sydney Plaster Master cover?

We are based in Bexley and cover the whole of Sydney — the St George area, Inner West, Eastern Suburbs, Sutherland Shire, North Shore, North Sydney, Western Sydney and the CBD. Send us your address and we will confirm.

How do I know if you are close enough?

We are based in Bexley and we cover all of Sydney. If you are in the St George area we are usually the nearest licensed plasterer to you, and small jobs are welcome. Further out we still come — just send the suburb with your enquiry and we will tell you straight away rather than leaving you waiting.

Are you licensed?

Yes. Sydney Plaster Master Pty Ltd holds NSW Contractor Licence No. 453300C, and we are insured. You can check the licence yourself on the NSW Fair Trading register. We can provide licence and insurance documentation for builders, certifiers and strata managers who need it on file.

How long have you been plastering?

Twenty-five years in the trade. That covers everything from single-room repairs through to commercial fitouts, and it is the reason we can tell you early when a job is going to be more involved than it looks.

How much does plastering cost in Sydney?

It depends on access, surface condition, room size and the finish required, and anyone quoting a firm price over the phone is guessing. We have written a plain-English guide to what actually moves the price and how to read a plastering quote — see our plastering costs page. For most residential jobs a few photos are enough for us to price it accurately in writing.

How quickly will I get a price?

Send photos and your suburb before 3pm on a working day and we will come back with a price the same day for most residential jobs. Commercial work quoted from drawings takes longer, and we will tell you when to expect it.

Do you take on commercial and fitout work?

Yes, and it is a large part of what we do. Plasterboard partitions, suspended and grid ceilings, bulkheads and fire-rated wall and ceiling systems for builders, shopfitters, offices and strata managers, including after-hours and staged works in occupied buildings.

Do you install fire-rated systems?

Yes. Fire-rated walls and ceilings installed to the specified FRL, built to the tested system, with penetrations detailed and photographed before close-up for your certifier.

Can you repair damaged plasterboard and ceilings?

Yes. Cracks, holes, impact damage, sagging ceilings and water damage. We work out what caused it first, because patching over movement or moisture just means it comes back. And if you can pick where the patch was once it is painted, we come back and fix it.

Is any job too small?

No. A single hole, one cracked ceiling or a bit of damage from a removed fixture are all normal jobs for us. We would rather do the small job properly than turn it away.

Bexley Based, Sydney Wide

Areas We Serve

Based in the St George area and working right across Sydney, from single-room repairs to full commercial fitouts.

📍St George
📍Bexley
📍Rockdale
📍Kogarah
📍Hurstville
📍Inner West
📍Eastern Suburbs
📍Sutherland Shire
📍North Shore
📍North Sydney
📍Western Sydney
📍Sydney CBD

Tell Sydney Plaster Master About Your Job

Share your suburb, project type and timing. Photos let us price most residential jobs without a site visit. For commercial work, attach the drawings and tell us the programme dates.

Job Enquiry

The job

So we know if it's in our area.
For example, one ceiling in a 4x4m room, or an 85-square home.
Panelled plasterboard ceiling with recessed downlights above full height glazing
Ready to Start

Get Your Sydney Plastering Quote

Send photos for a residential job, or drawings for a commercial one. Either way you get a written quote back.

ZMade with Zarla